How to Price Pool Repair and Equipment Quotes

Weekly service pays the bills, but repairs are where a route can make real money or quietly lose it. A pump that "should take an hour" takes three. A part goes up between the quote and the install. A customer approves a price you gave them in March and wants it honored in July.

This guide covers how to build a repair or equipment quote you won't regret: what goes into the price, the difference between markup and margin, how to set a labor rate from your own numbers, and what to put in writing. We make Easy Pool CRM, so there's a short section at the end on how our estimates work, including what they don't do. Facts about our product were checked on November 9, 2026.

What goes into a pool repair quote?

Every repair price is built from the same pieces. Leave one out and it comes out of your pocket.

  • Parts. What the part costs you, plus your markup.
  • Labor. How long the job takes, times your labor rate.
  • The trip. Driving there, diagnosing, and any extra trip to pick up a part.
  • Extras. Fittings, glue, O-rings, disposal of the old equipment.
  • Overhead. Truck, insurance, phone, software, and the hours you spend quoting and ordering.
  • Profit. What's left after all of that. It should be a number you chose, not whatever happened.
  • Sales tax, where your state charges it on parts, labor, or both.

Sales tax rules for parts and labor differ by state. Check with your state's revenue department or your accountant before you set up your quotes.

What's the difference between markup and margin?

They sound the same, and mixing them up is one of the easiest ways to underprice.

  • Markup is what you add on top of your cost, as a percent of cost.
  • Margin is how much of the final price you keep, as a percent of the price.

Say a part costs you $400 and you mark it up 25%. You charge $500. You made $100, which is 25% of your cost but only 20% of the price. If you were aiming for a 25% margin, you came up short.

Markup on costMargin on price
20%16.7%
25%20%
33.3%25%
50%33.3%
100%50%

To hit a target margin, divide your cost by (1 minus the margin). For a 25% margin on a $400 part, that's $400 ÷ 0.75 = $533.33.

Pick one way to talk about it and stick with it. If you think in margin, price in margin.

How do you set a labor rate for repairs?

Start from what an hour of repair work costs you, not from what someone else charges. Your costs, your area, and your experience are different.

  1. Your labor cost per hour. Wages plus payroll taxes, workers' comp, and anything else you pay per hour worked. If it's just you, use what you need to pay yourself.
  2. Your overhead per hour. Add up a year of overhead (truck, insurance, tools, phone, software) and divide by the hours you actually bill, not the hours you work. Drive time and quoting aren't billable.
  3. Your target margin. Then divide: labor rate = (labor cost + overhead) ÷ (1 − target margin).

Here's an example with made-up numbers, not a recommendation. If your labor costs $40 an hour, overhead adds $30, and you want a 30% margin on labor, your rate is $70 ÷ 0.70 = $100 an hour.

Then be honest about time. Estimate the job, and add time for the things that always happen: a seized union, a missing fitting, a run to the supply house.

Should you charge a trip or diagnostic fee?

If you drive out, figure out the problem, and the customer decides not to fix it, that visit still cost you. A diagnostic fee covers it. You can also credit the fee toward the repair if the customer says yes, which makes it easier to accept.

Whatever you decide, say it before you go: how much, what it covers, and whether it's credited.

Should you quote flat-rate or time and materials?

QuestionFlat rateTime and materials
What the customer seesOne price for the jobHourly labor plus parts
Who carries the risk if it takes longerYouThe customer
Best forJobs you've done many times, like a pump or motor swapLeaks, troubleshooting, anything you can't see yet
What to watchPrice in your real average time, not your best dayGive a range and update the customer before you go over it

You can use both: flat rates for common swaps and time and materials for diagnosis and leak work.

What changed for pool pump replacement quotes?

If you replace pump motors, check what you're quoting. Under federal energy rules (10 CFR 431.485), dedicated-purpose pool pump motors from 1.15 to 5 total horsepower manufactured starting September 29, 2025, must be variable speed. For motors from 0.5 to under 1.15 total horsepower, the date is September 28, 2027. Motors under 0.5 total horsepower made from September 29, 2025, must meet a minimum full-load efficiency of 69%.

The rule applies by manufacture date, so you may still see older stock. But if your customer is used to a like-for-like single-speed swap, the replacement you can buy now may be a different kind of motor at a different price. Price from a current supplier quote, not last year's invoice, and explain the change in the quote's notes so the customer isn't surprised.

Do you need a license to quote equipment work?

It depends on your state, so check before you quote. In Florida, for example, the law defines a swimming pool/spa servicing contractor's work as including "the repair or replacement of existing equipment" and "the installation of new pool/spa equipment," and says replacing equipment permanently attached to the pool for water treatment or cleaning requires a license. Florida law also says "the negotiation or bid for a contract" on work that needs a license counts as contracting, so the quote itself can fall under the rule.

Under the same law, cleaning that doesn't affect the structure of the pool or its equipment doesn't need a license, and neither does water treatment that doesn't involve that kind of equipment work. If you're not sure where your work falls, ask your state's licensing board.

What should a written repair quote include?

A good quote answers the customer's questions before they call you.

  • Each item on its own line, with quantity and price. "Pump replacement, $1,200" invites questions. Showing the part, the labor, and the extras separately shows your work.
  • The part, by brand and model if you can, so the customer can see what they're getting.
  • What's not included. For example, electrical work, permits, or piping changes you might find once the old equipment is out.
  • An expiration date. Parts prices change. Pick a window, like 30 days, that matches how often your supplier's prices move.
  • Deposit terms, if you need one.
  • Warranty, both the manufacturer's and yours on the work, in plain words.
  • Taxes, shown separately.
  • A clear way to say yes, whether that's a reply, a signature, or an approve button.

When should you ask for a deposit?

Ask for one when you have to buy something you can't easily return, like a special-order heater or a large equipment package. A deposit covers your cost if the customer changes their mind after you've ordered. Put the amount, or the percentage, on the quote so there's no surprise when the invoice comes.

What mistakes cost you money on repair quotes?

  • Using markup and margin as if they were the same thing. See the table above.
  • Quoting your best-case time. Price your average.
  • No expiration date. An old price will come back.
  • Forgetting the small stuff. Fittings, glue, disposal, and the second trip add up.
  • One big number. It's harder to defend and easier to argue with.
  • Not following up. A quote nobody answers can mean a customer who's still deciding, or one who went with someone else. A short check-in tells you which.

Checklist: before you send a repair quote

CheckWhy it matters
Part cost is currentPrices move, especially on equipment
Markup or margin is the one you meantAvoids underpricing
Labor time is your average, not your bestProtects your margin
Trip or diagnostic fee is on the quoteThe visit cost you either way
Extras and disposal are includedSmall costs add up
Exclusions are written downFewer arguments later
Expiration date is setOld prices stay old
Deposit is stated, if neededCovers special orders
Tax is shown separatelyClear total
You're licensed for the work, where requiredThe quote can count as contracting

How does Easy Pool CRM handle repair estimates?

Here's what our estimates do today, and where they stop. They're on every plan, starting with Starter at $35 a month. We use flat monthly pricing with no per-pool fees.

Line items. Each estimate is a list of line items with a description, quantity, and unit price. You can mark each line taxable or not and set a tax rate, and the subtotal, tax, and total add up for you.

Saved service types. Set up your common jobs with a default price, and pick them from a dropdown when you build an estimate or invoice. You can still change the line after you pick it.

Notes. Add notes to the estimate, like what's not included and how long the price is good for.

Deposits. Set a deposit as a percentage or a fixed amount.

Sending and approval. Send the estimate by email. The customer can open it in your customer portal and approve or decline it there. If they reply to the email instead, you can mark it approved or declined yourself. You can also set automatic reminders a set number of days after the estimate was created.

Turning it into an invoice. Once an estimate is approved, convert it to an invoice in one step. The line items, totals, and deposit carry over. After you've finished Stripe setup, customers can pay by card from the portal, and when a deposit is set, they pay the deposit first. Card payments through the portal cost 3.4% + $0.30 per payment, taken out of your payout. Read more about what customers see in the portal.

The honest limits:

  • It doesn't work out your price. There's no markup or margin calculator, and no parts catalog or supplier pricing. You enter the numbers.
  • One tax rate applies to each estimate.
  • You can't set an expiration date on an estimate in the app yet. Put the "valid until" date in the notes.
  • The deposit shows up on the invoice, not on the estimate your customer sees. If you need one, say so in the notes too.
  • Customers approve with a button. We don't collect a drawn signature.
  • Estimates and reminders go out by email. We don't send text messages.

FAQ

How do you price a pool repair? Add up the part cost plus your markup, the labor time at your labor rate, a trip or diagnostic fee, and small extras like fittings and disposal. Then add sales tax where your state charges it.

What's the difference between markup and margin? Markup is a percent of your cost. Margin is a percent of the price. A 25% markup gives you a 20% margin, and a 50% markup gives you a 33.3% margin.

How do I set my hourly rate for pool repairs? Take your labor cost per hour plus your overhead per billable hour, and divide by (1 minus your target margin). Use your own numbers, not a competitor's.

Do new pool pumps have to be variable speed? Under federal rules, dedicated-purpose pool pump motors from 1.15 to 5 total horsepower manufactured from September 29, 2025, must be variable speed. Motors from 0.5 to under 1.15 total horsepower follow on September 28, 2027.

How long should a pool repair quote be valid? There's no standard. Pick a window long enough for the customer to decide and short enough that parts prices haven't moved, like 30 days, and put the date on the quote.

Can customers approve estimates online in Easy Pool CRM? Yes. They can approve or decline an estimate in your customer portal, and you can turn an approved estimate into an invoice in one step.

Can I try Easy Pool CRM's estimates before I pay? Yes. The first 30 days are free, then you get a 30-day money-back guarantee. You can cancel anytime.

Try Easy Pool CRM

Set up your common repair jobs with your own prices, build one real estimate, and open it from the customer's side. Plans start at $35 a month, and the first 30 days are free, followed by a 30-day money-back guarantee. See pricing.

Sources

accessed November 9, 2026

30 days free, then a 30-day money-back guarantee. Cancel anytime.