Pool Chemistry Log: What Service Techs Should Record on Every Visit

When a customer calls to say the pool is green, the first thing you'll want is last week's numbers. What was the chlorine? What did you add? Did anyone take a photo? If the answer is "I think it was fine," you're arguing from memory.

A chemistry log fixes that. This guide covers what to write down at every stop, what you can test less often, how long to keep it, and the mistakes that make a log useless. We make Easy Pool CRM, so there's a short section at the end on how our visit log works, including its limits. Facts about our product were checked on November 3, 2026.

What is a pool chemistry log?

It's a record, pool by pool, of what the water tested at each visit and what you did about it. For a route tech, each entry is one stop: the date, who was there, the readings, the chemicals added, a photo or two, and a note if something looked off.

Public pools are required to keep records like this. CDC's guidance for public pool operators says to "maintain accurate records of disinfectant/pH measurements and maintenance activities." A backyard pool isn't a public pool, but the reasons are the same: you can spot trends, you can show your work, and the next tech knows what happened last time.

What should you record at every stop?

Keep the every-visit list short so it actually gets filled in at stop 14 in August.

  • Date and time. "Did you come?" should have a one-line answer.
  • Who did the visit. Matters once you have a helper.
  • Free chlorine. The number that keeps swimmers safe.
  • pH. Chlorine works worse as pH climbs.
  • Chemicals added, with amounts. "Added acid" isn't enough. Write the product and how much.
  • Notes. "Filter pressure high," "pump noisy," "dog let out of the gate." One line beats a perfect reading.
  • A photo. The water, plus anything broken or unusual.

If you only test two things, test free chlorine and pH. CDC tells home pool owners that "chlorine and pH are the first defense against germs that can make swimmers sick."

What are the target ranges for chlorine and pH?

Here's what CDC says for home pools (page dated May 10, 2024):

  • pH: 7.0 to 7.8. CDC says this range "best balances killing germs to prevent swimming-related illness, the lifespan of the pipes, and swimmers' comfort." Above 8.0, chlorine's ability to kill germs drops. Below 7.0, pipes and equipment are more likely to corrode.
  • Free chlorine: at least 1 ppm in pools that don't use stabilizer.
  • Free chlorine: at least 2 ppm if you use cyanuric acid (stabilizer) or stabilized chlorine such as dichlor or trichlor.
  • Hot tubs: at least 3 ppm free chlorine, and CDC recommends not using cyanuric acid in hot tubs.

CDC's Model Aquatic Health Code (2024, 5th edition) uses the same minimums for public pools and sets no fixed upper number for chlorine. It says the maximum "shall not exceed limits specified on the product label." So for the high end, the label on the product you use is the rule.

These are minimums, not a recipe. How much to add depends on the product, its strength, and the pool's volume, so follow the product label and your training.

What can you test less often?

Some readings don't move much week to week. The Model Aquatic Health Code, written for public pools, sets these testing schedules:

ReadingMAHC testing frequency (public pools)MAHC limit or range
Total alkalinityWeekly60 to 180 ppm
Cyanuric acid (stabilizer)Monthly, and 24 hours after adding it. Weekly if stabilized chlorine is the main disinfectant90 ppm or less. At 300 ppm or higher, the pool stays closed until fixed
Calcium hardnessMonthlyNo more than 2,500 ppm
Saturation indexMonthlyWater should be "chemically balanced"
Total dissolved solids (TDS)QuarterlyNo limit set
Salt (salt chlorine generators)At least weekly, or per the manufacturerThe range the equipment requires
Combined chlorineTested along with free chlorineTake action above 0.4 ppm

A weekly residential route won't match a public pool's schedule. But the table is a good reminder of what belongs in the log even when you don't test it every time. If you test stabilizer once a month, log it once a month, so you can see it creeping up.

Why record combined chlorine?

Combined chlorine is chlorine that's tied up as chloramines. The Model Aquatic Health Code says it is "less reactive than free available chlorine," and you get it by subtracting free chlorine from total chlorine (CC = TC − FC). The code tells public pools to take action when it goes over 0.4 ppm. If your test kit gives you total chlorine, writing down combined chlorine costs you nothing, and it's useful context when a customer says the water bothers their eyes.

What else belongs in the log besides chemistry?

The Model Aquatic Health Code's list of daily records for public pools goes past water chemistry. A few items are worth copying on a residential route:

  • Filter pressure or flow, and when you backwashed or cleaned the filter.
  • Equipment problems, like a heater that won't fire or a pump that lost prime.
  • Water temperature, if the pool is heated.
  • Service tasks done, like brushing, skimming, and emptying baskets.

These notes are what turn "the pool was fine" into "the filter was at 25 psi and I cleaned it."

How long should you keep pool chemistry records?

For residential pools there's usually no rule, so keep them as long as you service the pool. Old entries are how you answer "it's been cloudy all month" and how you show a new tech what the pool usually needs. For public or commercial pools, check your state or local code, which may set its own requirements.

What mistakes make a chemistry log useless?

  • Logging later from memory. Numbers written at the end of the day drift. Log at the stop.
  • Leaving out the chemicals. A reading without what you added only tells half the story.
  • No units or no amounts. "1 jug" means different things to different people.
  • Different test methods without noting it. CDC says DPD test kits are more accurate than test strips. If you switch, write it down.
  • Chlorine readings above 10 ppm. CDC warns a DPD test can bleach out above 10 ppm and read falsely low or zero. If the color looks off, retest.
  • Scattered records. A notebook in the truck, texts on your phone, and a spreadsheet at home is three logs, not one.

Checklist: a pool chemistry log entry

FieldEvery visit?Why it matters
Date and timeYesProves the visit
TechnicianYesKnow who to ask
Free chlorineYesMain germ defense
pHYesControls how well chlorine works
Combined chlorineWhen you test total chlorineChlorine that's no longer working well
Total alkalinityWeekly or as you test itKeeps pH steady
Cyanuric acidMonthly, or after adding itHigh levels need attention
Calcium hardnessMonthlyScale and surface damage
SaltSalt pools, as the equipment needsKeeps the generator working
Water temperatureHeated poolsAffects balance and comfort
Chemicals added and amountsYesThe other half of the reading
PhotoYesProof and equipment problems
NotesWhen something's offThe detail customers remember

How does Easy Pool CRM log a pool visit?

Here's what our visit log does today, and where it falls short. It's on every plan, starting with Starter at $35 a month. We use flat monthly pricing with no per-pool fees.

Readings. Each visit can record free chlorine, combined chlorine, pH, total alkalinity, calcium hardness, cyanuric acid, salt, TDS, and water temperature. Fill in the ones you test and leave the rest blank.

Chemicals used. Log each product and the quantity you used.

Photos and notes. Attach photos to each visit. The limit is per visit: 5 on Starter, 10 on Pro, 15 on Team, and 20 on Growth. Add notes for anything the readings don't cover.

Service checklist. Set a checklist for your company, add extra items for a specific pool, and check items off or skip them at each visit.

History. Every visit is saved with the date, time, and technician. You can look back through a customer's past visits, and customers can see their own visit history, readings, and photos in the customer portal.

Reports. After a visit, the customer can get an email with the readings, a photo, and a link to the full report. You choose whether reports go out after a short delay, right away, after your review, or not at all.

The honest limits:

  • It records what you tested. It doesn't test the water for you, and it doesn't replace the product label or your training.
  • Visits are logged by field techs. Plans include 1 field tech on Starter, 3 on Pro, 6 on Team, and 15 on Growth.
  • Reports go out by email. We don't send text messages.
  • The log is only as good as what gets entered at the stop.

FAQ

What should a pool chemistry log include? At every visit: the date and time, who did it, free chlorine, pH, chemicals added with amounts, a photo, and notes. Add alkalinity, stabilizer, calcium hardness, and salt as you test them.

What free chlorine level does CDC recommend for a home pool? At least 1 ppm, or at least 2 ppm if the pool uses cyanuric acid (stabilizer) or stabilized chlorine. For hot tubs, at least 3 ppm.

What pH should a pool be? CDC recommends 7.0 to 7.8 for pools and hot tubs.

How high can cyanuric acid go? CDC's Model Aquatic Health Code says public pools must keep it at or below 90 ppm, and a pool at 300 ppm or higher stays closed until it's fixed. It's written for public pools, but it's a useful reference for any route.

How often should alkalinity and calcium be tested? The Model Aquatic Health Code says weekly for total alkalinity and monthly for calcium hardness at public pools. Many residential routes follow a similar rhythm.

Can I try Easy Pool CRM's visit log before I pay? Yes. The first 30 days are free, then you get a 30-day money-back guarantee. A card is required to start. You can cancel anytime.

Try Easy Pool CRM

Log a week of real stops and look at the history by pool. Plans start at $35 a month, and the first 30 days are free, followed by a 30-day money-back guarantee. See pricing.

Sources

accessed November 3, 2026

30 days free, then a 30-day money-back guarantee. Cancel anytime.